HEIDENHAIN iTNC 530 Service Manual page 538

Shipping brace of
the hard disk
Figure: Sticker regarding the shipping brace of the hard disk on the housing of the MC 422
Integrating the new
drive assembly
28 – 538
Secure the hard disk for the transport!
(See sticker on the housing of the MC 422.)
Remove the shipping braces before mounting the hard disk!
See sticker on the housing of the MC 422. The hard disk must oscillate freely!
Insert the new drive assembly in the MC 422.
Connect MC 422 to the CC and screw it into place.
Re-establish and screw into place all the connections.
Caution
Do not confuse any of the connectors! Do not forget the grounding screw!
Switch on the main switch of the machine.
HEIDENHAIN Service Manual iTNC 530