Err Key - HEIDENHAIN iTNC 530 Service Manual

4.3

ERR Key

If there is an AND symbol (little red roof) in the header in addition to the error message, there is
more than one pending error message.
The ERR key (ERROR) is located directly over the HELP key. When this key is pressed all
pending NC and PLC error messages of the control are displayed in an own window.
In addition, the help window can be called with the HELP key.
4 – 26
Display all pending error messages in a list
(If you press this key again, the window will close.)
List of error messages
In the ERR window
In order of priority
Errors with a higher priority are at the top of
the list.
Note
If your machine still features an old keyboard without an ERR key over the HELP key, press
the respective "space key" over the HELP key. --> If the NC software of the iTNC 530
supports the function of the ERR key, it can also be used to call the ERR list!
In the log
In chronological order
The log is written from top to bottom, i.e.,
older errors are at the top, younger errors at
the bottom.
HEIDENHAIN Service Manual iTNC 530