Copying From The Bypass Tray - Ricoh 2015 General Settings Manual

Copying

Copying from the Bypass Tray

Use the bypass tray to copy onto OHP
transparencies, thick paper, enve-
lopes and copy paper that cannot be
loaded in the paper trays.
2
Important
❒ Paper longer than 433 mm may be-
come wrinkled, may not feed in,
and may jam.
Note
❒ If you do not use standard size
copy paper, or if you use special
paper, you should enter its vertical
and horizontal dimensions. See
p.20 "Placing custom size origi-
nals". The sizes you can enter are
as follows:
Metric
version
Inch
version
❒ The machine can automatically de-
tect the following sizes as regular
size copy paper:
Metric
version
Inch
version
❒ When copying onto OHP transpar-
encies or paper heavier than 105
2
g/m (about 28 lb.), you need to
specify the paper type. See p.24
"When copying onto special pa-
per" .
❒ The maximum number of sheets
you can load at the same time de-
pends on paper type. The maxi-
mum number of sheets should not
exceed the upper limit.
22
• Vertical: 90–297 mm
• Horizontal: 148–600 mm
• Vertical: 3.55"–11.69"
• Horizontal: 5.83"–23.62"
A3L, A4KL, A5KL, 8" ×
13"L
11" × 17"L, 8 " × 11"KL,
1
/
2
" × 8 " × 14"L
1 1 1
5 / / "L, 8 /
2 2 2
A A A A
Open the bypass tray.
B B B B
Push up the paper guide release
lever.
1.
Paper guide release lever
ZENY100E
1
ZENY110E