Ricoh 2015 General Settings Manual page 790

UNIX Configuration
I I I I
Do a test print to make sure that the settings are correct.
# lpr -Pnp file_name
# lp -dnp file_name
1
Reference
For more information about the "lpr" and "lp" commands, see p.14 "Print-
ing Methods".
Deleting the printer
To print using the "lp" or "lpr" commands, the option specified when the instal-
lation shell script is executed is used. Change the option in accordance with the
workstation you are using.
❖ ❖ ❖ ❖ BSD UNIX workstation, Linux
Delete the printer entry from /etc/printcap, and then execute the installation
shell script again. Select options during the setup process.
Alternatively, search the printer entry from /etc/printcap, and change its
"rp" capability to option setting.
❖ ❖ ❖ ❖ Solaris, HP-UX
Delete the printer entry, and then execute the installation shell script again.
Select options during the setup process. To delete the printer entry, follow the
procedure below:
A Stop the scheduler.
# /usr/sbin/lpshut
B Delete the printer.
# /usr/sbin/lpadmin -x printer_name
C
Restart the scheduler.
# /usr/lib/lpsched
8