Display; Reading The Display And Using Keys - Ricoh 2015 General Settings Manual

Display

This section explains how to read the display and use the Selection key for the
initial copy display.
Note
❒ The copy display is set as the default screen when the machine is turned on.
❖ ❖ ❖ ❖ Initial copy display
1.
Operational status or messages
2.
Messages and the selected tray
appear here. Currently selected
items appear in brackets.

Reading the Display and Using Keys

This section explains how to read the display and use the selection key for the
initial copy display.
Note
❒ The copy display is set as the default screen when the machine is turned on.
1.
Selection keys
Correspond to items at the bottom line on
the display.
Example: initial copy display
• When the instruction "press [100%]"
appears in this manual, press the left
selection key.
1 2
AAX024S
4
3.
Number of copies set.
4.
Reduce/Enlarge ratio function for
non-fixed ratios.
1
• When the instruction "press [R/E]" ap-
pears in this manual, press the centre
selection key.
• When the instruction "press [Auto
R/E]" appears in this manual, press the
right selection key.
3
AAI024S
4
OK
2 3
AAI015S
9