Note
❒ For details about setting parameters, see p.80 "User Parameters".
Follow the procedure below to set the home position parameters.
Important
❒ Do not change any bit switches other than those shown in the above table.
A A A A
Press the { { { { User Tools/Counter} } } } key.
User Tools/
Counter
On Hook Dial
On Hook Dial
B B B B
Select [Fax Features] using { { { { U U U U } } } } or { { { { T T T T } } } } , and then press the { { { { OK} } } } key.
C C C C
Select [Key Operator Tools] using { { { { U U U U } } } } or { { { { T T T T } } } } , and then press the { { { { OK} } } } key.
D D D D
Select [Parameter Setting] using { { { { U U U U } } } } or { { { { T T T T } } } } , and then press the { { { { OK} } } } key.
E E E E
Select [Home Position] using { { { { U U U U } } } } or { { { { T T T T } } } } , and then press the { { { { OK} } } } key.
Clear
Modes
Clear/Stop
AAN215F
Using Key Operator Settings
7
87