Table of Contents
Advertisement
Basic Operation
Copying from the Bypass Tray
Use the bypass tray to copy onto thick paper, adhesive labels, OHP transparencies, or custom size paper.
Also use the bypass tray to copy onto the reverse side of paper that has already been copied onto.
Note
The following limitations apply:
Acceptable paper types
Number of sheets that can
be set at one time
Select one of the following settings or keys:
[Normal Paper] : normal paper
[Thick] :
thick paper, post cards, adhesive labels, translucent paper
[OHP] :
OHP transparencies
[Duplex Back] : Copying onto the reverse side of paper that has been already copied onto.
[Custom Size] : Select this after the paper type for custom sized paper.
When you copy onto OHP transparencies, you can select whether a blank slip sheet is inserted between OHP trans-
parencies.
When you set several sheets at a time, fan them to get air between them before loading.
If the copy paper is curled, gently roll it to remove the curl.
When you copy onto OHP transparencies, insert them with the copy side up.
Do not stack copy paper above the limit mark.
If the copy paper is curled, correct it before setting paper in the bypass tray. If the curled is not corrected, a paper
misfeed might occur.
When the optional sorter stapler is installed, copies made onto thick or OHP transparencies are not delivered in the
proof tray but in the first bin instead.
When setting custom size paper, be sure to set the size after pressing the [Custom Size] key.
44
Normal paper (52 - 105g/m
Thick paper (105 - 160g/m
Post cards
OHP transparencies
Adhesive labels
Translucent paper
Standard size
Custom size
1
2
1:Horizontal
3
2:Vertical
3:Feed direction
GCBYPA1E
Normal paper
Thick paper, OHP transparencies:
Adhesive labels:
Translucent paper:
Post cards:
2
, 14 - 28 lb)
2
, 28 - 43 lb)
Metric version:
l: A3, B4, A4, B5, A5, B6, A6, 11" × 17", 12" × 18"
p: A4, B5, A5, 8
Inch version:
l: 12" × 18", 11" × 17", 8
" × 11", 5
p: 8
1/2
Metric version:
Vertical:
100 - 305mm (in 1mm steps)
Horizontal: 140 - 457mm (in 1mm steps)
Inch version:
Vertical:
3.9" - 12.0" (in 0.1" steps)
Horizontal: 5.5" - 18.0" (in 0.1" steps)
50 sheets
30 sheets (smaller than 8" × 13")
15 sheets (8" × 13" or large)
30 sheets
50 sheets
25 sheets
see page 46.
" × 11"
1/2
" × 11", 5
" × 8
1/2
1/2
" × 8
"
1/2
1/2
see page 49.
"
1/2
Advertisement
Table of Contents
