Copying From The Bypass Tray; Loading Paper On The Bypass Tray - Ricoh Aficio MP 1800 Operating Instructions Manual

Copying from the Bypass Tray

Use the bypass tray to copy onto OHP transparencies, thick paper, envelopes,
and paper that cannot be loaded in the paper trays.
Important
❒ Paper that has a vertical length of 90-297 mm (3.55"-11.69") and a horizontal
length of 148-600 mm (5.83"-23.62") can be copied from the bypass tray. How-
ever, when paper larger than 433 mm (17.1") in size is used, the paper may
become wrinkled, may not be fed into the machine, or may cause paper jams.
❒ The machine can detect the following sizes as regular size paper:
• Metric version
A3L, A4KL, A5KL, 8" × 13"L
• Inch version
11" × 17"L, 8
1
If you want to use the size of paper other than the above, be sure to specify
the size.
Reference
"Copy Paper", About This Machine

Loading Paper on the Bypass Tray

Use the bypass tray to copy onto OHP transparencies, thick paper, envelopes
and paper that cannot be loaded in the paper trays.
Important
❒ When copying on OHP transparencies or paper heavier than 105 g/m
you need to specify the type and size of paper.
❒ The maximum number of sheets you can load into the bypass tray depends
on the paper type. When loading paper, make sure the top of the stack is not
higher than the limit mark of the bypass tray.
A
Open the bypass tray.
" × 14"L, 8 " × 11"KL, 5
1
/ /
2 2
ARB016S
Copying from the Bypass Tray
" × 8
1 1
/ / "L
2 2
2
(about 28 lb.)
2
25