Copying Information To A File - Ricoh 2015 General Settings Manual

UNIX Configuration
Note
❒ Leave the user name and password field blank and press the { { { { RETURN} } } } ({ { { { EN-
TER} } } } ) key.
❒ "-" indicates standard output. It will be displayed on screen if standard out-
1
put has not been specified.
Parameters that can be used with "rsh", "rcp", and "ftp" are as follows:
Parameter
stat
info
prnlog
syslog

Copying Information to a File

Use the "rcp" or "ftp" command to copy information about specified parameters
to a file.
You can use these commands for BSD and System V UNIX.
Note
❒ The same parameters are used as those above.
% rcp host_name:parameter file_name
% ftp host_name
User: user_name
password:
ftp> get parameter file_name
Note
❒ Leave the user name and password field blank and press the { { { { RETURN} } } } ({ { { { EN-
TER} } } } ) key.
18
Information returned
Status of the printer. Information about print jobs.
Information about the paper tray, output tray, and printer language.
Record of the last 20 jobs printed.
Record of messages about the network interface board.