Copying From The Multi Bypass Tray - Ricoh Gestetner DSm790 Operating Instructions Manual

Copying from the Multi Bypass Tray

The multi bypass tray allows you to copy non-standard paper.
Important
❒ Paper that has a vertical length of 100-330 mm (3.9-13 inch) and a horizontal
length of 140-458 mm (5.5-18 inch) can be copied from the multi bypass tray.
❒ The machine can detect the following sizes as regular size copy paper:
A3L, B4 JISL, A4KL, B5 JISK, A5KL, A6L, 11" × 17"L, 8
8" × 13"L, 5 " × 8
1
/
2
er than the above, be sure to specify the size.
❒ The maximum number of sheets you can load into the multi bypass tray de-
pends on paper type. The number should not exceed the upper limit.
A
Set the side fences to the paper size.
B
Place paper in the multi bypass tray (Tray 7).
C
Adjust the side fences again to ensure they properly fit the paper size.
D
Set the end fence.
To remove the end fence, slide it to the right by pressing the stopper down.
"L,12" × 18"L. If you want to use the size of paper oth-
1
/
2
APF028S
APF029S
Copying from the Multi Bypass Tray
" × 11"K,
1
/
2
2
43