Copying From The Bypass Tray - Ricoh Aficio MP C300 Operating Instructions Manual

2. Basic Copying

Copying from the Bypass Tray

The bypass tray allows you to copy non-standard paper.
Use the bypass tray to copy onto OHP transparencies, adhesive labels, translucent paper, and paper that
cannot be loaded in the paper trays.
2
• The Duplex function cannot be performed on paper fed from the bypass tray. If [1 Sided
is selected, cancel the setting. You can also change the initial settings. See "Changing the Default
Functions of the Copy's Initial Display".
• Paper that has a horizontal length of 127.0 355.6 mm (5.00 14.00 inches) and a vertical length
of 70.0 216.0 mm (2.76 8.50 inches) can be copied from the bypass tray. (148.0 355.6 mm
(5.83 14.00 inches) horizontal length when prints are delivered to the right tray.)
• The machine can automatically detect the following sizes as regular size copy paper:
1
• 8 / × 11 , 7
2
• If the paper you want to copy onto is not shown on the Paper Type screen or is lighter than 81 g/
2
m (20 lb. Bond) or heavier than 90 g/m
Paper Settings in User Tools. For details about Tray Paper Settings, see "System Settings", Network
and System Settings Reference.
• Do not use color OHP transparencies that are coated with materials that might melt.
• The maximum number of sheets you can load at the same time depends on paper type. Do not load
paper above the limit mark.
[Bypass Tray Usage]
Press [Bypass Tray Usage] to display a description on using the bypass tray.
42
1 1 1
/ × 10 / , 5 / × 8
4 2 2
2
(24 lb. Bond), you must specify the paper type under Tray
1
/
2
2 Sided]