1. Manuals
  2. Brands
  3. Ricoh Manuals
  4. All in One Printer
  5. 2020D - Aficio B/W Laser
  6. Scanner reference

Ricoh 2020D - Aficio B/W Laser Scanner Reference

Operating instructions printer/scanner unit type 2018
Hide thumbs Also See for 2020D - Aficio B/W Laser:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Feature Manual, User Manual
Read this manual carefully before you use this machine and keep it handy for future reference. For safe and correct use, be sure to read the Safety
Information in the "Copy Reference" before using the machine.
Printer/Scanner Unit
Network Scanner
Preparations for Use as a Network Scanner
Setting Originals
Sending Scan Files by E-mail
Using the Network Delivery Scanner Function
Using the Network TWAIN Scanner Function
Appendix
Type 2018

Operating Instructions

Scanner Reference

Advertisement

Table of Contents
loading

Related Manuals for Ricoh 2020D - Aficio B/W Laser

Summary of Contents for Ricoh 2020D - Aficio B/W Laser

  • Page 1: Operating Instructions

    Printer/Scanner Unit Type 2018 Operating Instructions Scanner Reference Network Scanner Preparations for Use as a Network Scanner Setting Originals Sending Scan Files by E-mail Using the Network Delivery Scanner Function Using the Network TWAIN Scanner Function Appendix Read this manual carefully before you use this machine and keep it handy for future reference. For safe and correct use, be sure to read the Safety Information in the "Copy Reference"...
  • Page 2 Introduction This manual contains detailed instructions and notes on the operation and use of this machine. For your safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy place for quick reference. The scanner function is available when the Printer/Scanner option is installed in the machine. Caution: Use of controls or adjustments or performance of procedures other than those specified in this manual might result in hazardous radiation exposure.

  • Page 3: Manuals For This Machine

    Manuals for This Machine The following manuals describe the operational procedures of this machine. For particular functions, see the relevant parts of the manual. Note ❒ The manuals provided are specific to machine type. ❒ Adobe Acrobat Reader is necessary to view the manuals as a PDF file. ❒...
  • Page 4 ❖ ❖ ❖ ❖ Manuals for DeskTopBinder Lite DeskTopBinder Lite is a utility included on the CD-ROM labeled "Scanner Driver & Document Management Utilities". • DeskTopBinder Lite Setup Guide (PDF file - CD-ROM2) Describes the installation of DeskTopBinder Lite, and the operating envi- ronment for DeskTopBinder Lite in detail.

  • Page 5: Table Of Contents

    TABLE OF CONTENTS Manuals for This Machine ..................i How to Read This Manual ..................1 Symbols ........................1 Names of Major Options .................... 2 1. Network Scanner Outline........................3 E-mail ......................... 3 Network Delivery Scanner..................4 Network TWAIN Scanner ................... 5 Control Panel......................
  • Page 6 5. Using the Network Delivery Scanner Function Preparation for Delivering...................51 Network Delivery Scanner Screen ................52 Delivering Scan Files................... 54 Delivery Procedure....................54 Checking the Status of Delivery ................. 64 6. Using the Network TWAIN Scanner Function Preparation for Using the Network TWAIN Scanner.........65 Network TWAIN Scanner Screen................65 Scanning Originals ....................66 Functions of the TWAIN Driver ................68...

  • Page 7: How To Read This Manual

    How to Read This Manual Symbols In this manual, the following symbols are used: Important If this instruction is not followed, paper might be misfed, originals might be damaged, or files might be lost. Be sure to read this. Preparation This symbol indicates the prior knowledge or preparations required before op- erating.

  • Page 8: Names Of Major Options

    Names of Major Options Major options of this machine are referred to as follows in this manual: • Exposure Glass Cover • Auto Document Feeder → ADF • Auto Document Feeder capable of scanning both sides of a sheet → ARDF •...

  • Page 9: Network Scanner

    1. Network Scanner Outline By installing the printer/scanner controller, the machine can be used as a net- work scanner. As a network scanner, the machine can send scan files by e-mail, operate as a net- work delivery scanner, and operate as a network TWAIN scanner. E-mail Scan files that are attached to an e-mail can be sent using the e-mail system through a LAN or the Internet.

  • Page 10: Network Delivery Scanner

    Network Scanner Network Delivery Scanner The machine is used as a delivery scanner with the ScanRouter delivery soft- ware. Scan files are stored in the delivery server and delivered to the folders of client computers on the same network. Reference p.51 “Using the Network Delivery Scanner Function”...

  • Page 11: Network Twain Scanner

    Outline Reference For more information about ScanRouter V2 Lite, DeskTopBinder Lite, or Auto Document Link, see p.i “Manuals for This Machine”. Network TWAIN Scanner The scanning function of this machine can be used from a client computer via a network (Ethernet, IEEE 1394 (IP over 1394) [optional], or IEEE 802.11b (Wire- less LAN) [optional]).

  • Page 12: Control Panel

    Network Scanner Control Panel This illustration shows the control panel when options are installed. 1011 12 Search Check Destination Destination Information On Hook Dial On Hook Dial Commu- Receive File nicating Immediate Trans. Start Manual Memory Reception Trans. Pause/ Redial Switch RX Mode Standard...
  • Page 13 Control Panel Quick Dial keys Press to select the registered destination with a single touch, or to enter letters and symbols. Reference For more information, see General Settings Guide. Note ❒ You can register up to 32 destinations using the Quick Dial keys. Quick Dial Flip Plate Flip this plate down to access Quick Dial keys 01 through 16;...

  • Page 14: Reading The Display And Using Keys

    Network Scanner Reading the Display and Using Keys This section explains how to read the display and use the selection key. Note ❒ The copy screen is set as the default screen when the machine is turned on. You can change the settings in [ System Settings ]. See General Setting Guide. AAH017S { { { { Cancel} } } } key Selection keys...

  • Page 15: Preparations For Use As A Network Scanner

    2. Preparations for Use as a Network Scanner To use the machine as a network scanner, you must make settings required for use as a scanner as well as basic settings for use in a network. Reference First, see General Settings Guide for details about how to make basic settings, and then make scanner settings.
  • Page 16 Preparations for Use as a Network Scanner ❖ ❖ ❖ ❖ Destination List Settings For explanations of settings, see p.14 “Destination List Settings”. Settings Default E-mail Deliv- TWAIN ❍ ❍ Destina- Destination List Pri- Delivery Server tion List ority Settings ❍...

  • Page 17: Change The Settings

    Initial Scanner Setup B B B B Select [Scanner Features] using { { { { U U U U } } } } or { { { { T T T T } } } } , and then press the { { { { OK} } } } key. C C C C Select a menu using { { { { U U U U } } } } or { { { { T T T T } } } } , and then press the { { { { OK} } } } key.

  • Page 18: Scan Settings

    Preparations for Use as a Network Scanner G G G G C C C C F F F F Repeat steps to make other settings. H H H H Press the { { { { Cancel} } } } key. The main menu appears.
  • Page 19 Initial Scanner Setup ❖ ❖ ❖ ❖ Orig. Orientation Priority Selecting a custom size Select the default for original placement orientation. When orig- When selecting [Custom Size] as the inals are always positioned the scan size, follow the procedure be- same way, select that orientation low.

  • Page 20: Destination List Settings

    Preparations for Use as a Network Scanner • When [Off] is selected, the ma- Destination List Settings chine will switch to the network TWAIN scanner function at This section explains how to set the once. defaults for the destination list dis- •...
  • Page 21 Initial Scanner Setup ❒ When [Off] is selected, the e- Note mail is not sent if its size exceeds ❒ When [On] is selected, all the limit, and an error message records are deleted after print- appears. The scan file is discard- ing.
  • Page 22 Preparations for Use as a Network Scanner Important ❒ It is recommended that a send- er's password be set to prevent the sender's name from being misused. ❒ When [On] is selected for [Key Operator Code] in [Key Operator Tools] of [System Settings] and [On: Partial] is set for the range, enter the key operator code when [Sender's Name Default] in...

  • Page 23: Installing Software

    Installing Software Installing Software The machine comes with three CD-ROMs containing various software. The CD-ROM labeled“Scanner Driver & Document Management Utilities” con- tains the necessary software to use the machine as a network scanner. The CD- ROM labeled “Printer Driver & Utilities” contains the necessary software to use the machine as a printer.
  • Page 24 Preparations for Use as a Network Scanner The installing sequence using Auto Run is as follows. Installation Sequence Insert the CD-ROM. TWAIN Driver Ver.3 TWAIN Driver The installer starts up. ScanRouter V2 Lite ScanRouter V2 ScanRouter Administration Select V2 Lite the software.

  • Page 25: Software For Using A Network Twain Scanner

    Installing Software Software for Using a Network TWAIN Scanner To use the machine as a network TWAIN scanner, it is essential to install the TWAIN driver. If you do not have applications that work with TWAIN, it is necessary to also install DeskTopBinder Lite.

  • Page 26: Software For Using The Network Delivery Scanner Function

    Preparations for Use as a Network Scanner Software for Using the Network Delivery Scanner Function To use the machine as a network delivery scanner, it is essential to install Scan- Router V2 Lite on the delivery server. To check an in-tray or retrieve files, it is necessary to install DeskTopBinder Lite on the client computer.

  • Page 27: Desktopbinder Lite

    Installing Software DeskTopBinder Lite Use Auto Run for installation. Preparation Before installation, check the system requirements for DeskTopBinder Lite. See p.22 “DeskTopBinder Lite”. A A A A Start Windows, and then insert the supplied CD-ROM labeled “Scanner Driver & Document Management Utilities” into the CD-ROM drive of the client computer.
  • Page 28 Preparations for Use as a Network Scanner ❖ ❖ ❖ ❖ System requirements Limitation ❒ Under Windows NT with RISC-based processors (MIPS R series, Alpha AXP, or PowerPC), this driver is not available. • Hardware PC/AT compatible • CPU Pentium or faster (Pentium 150 MHz or faster recommended) •...
  • Page 29 Installing Software ❖ ❖ ❖ ❖ System requirements • Hardware PC/AT compatible • CPU Pentium 133 MHz or faster (Pentium II 266 MHz or faster recommended) • Operating system Microsoft Windows 95 (OSR 2 or later) Microsoft Windows 98 Microsoft Windows Millennium Edition Microsoft Windows 2000 Professional (Service Pack 1 or later) Microsoft Windows 2000 Server (Service Pack 1 or later) Microsoft Windows XP Home Edition...
  • Page 30 Preparations for Use as a Network Scanner ScanRouter V2 Lite ScanRouter V2 Lite is to be installed on the delivery server. Scan files can be sort- ed in the delivery server, stored in specified in-trays, or saved in folders of client computers on the same network.
  • Page 31 Installing Software ❖ ❖ ❖ ❖ Software installed with ScanRouter V2 Lite • ScanRouter V2 Administration Utility ScanRouter V2 Administration Utility manages the delivery system run by ScanRouter V2 Lite. You can register destination and sender information for the scan files in the delivery server.
  • Page 32 Preparations for Use as a Network Scanner...

  • Page 33: Setting Originals

    3. Setting Originals This chapter explains the procedure for placing originals on the exposure glass and in the ADF, and setting the original scan area and orientation according to the placement method. To correctly display the top/bottom orientation of the scanned original on a cli- ent computer, the placement of the original and the settings made on the control panel and scanner driver must match.

  • Page 34: Placing On The Exposure Glass

    Setting Originals When scanning using the e-mail function or Speci- the delivery scanner fy the function orien- (Specified on the con- tation. trol panel screen) When scanning using the TWAIN scanner function (Specified in the Scan- ner Control dialog box) The original displayed on a computer B B B B...

  • Page 35: Placing In The Auto Document Feeder

    Placing Originals ❖ ❖ ❖ ❖ When placing the original so that Placing in the Auto Document the top edge touches the top left of the exposure glass Feeder When using the machine as a network TWAIN scanner, this The ADF allows you to place multiple orientation is the standard set- originals at one time.
  • Page 36 Setting Originals ❖ ❖ ❖ ❖ When placing the originals so that Note the top edges touch the back of the ❒ Originals of the same width and different length can be placed at the same time. Place the origi- nals as shown: AAH022S ADF placement orientation...

  • Page 37: Original Orientation And Scan Area

    Original Orientation and Scan Area Original Orientation and Scan Area To correctly display the top/bottom TWAIN Scanner E-mail/Network orientation of a scanned original on a Delivery Scanner client computer, original orientation Auto detection is used to deter- must be set when placing the original. mine the size of each original.
  • Page 38 Setting Originals ❒ The duplex function is available B When scanning one-sided orig- only when you have installed inals, select [1 Sided Original] us- ing { { { { U U U U } } } } or { { { { T T T T } } } } , and then press the optional ADF capable of the { { { { OK} } } } key.

  • Page 39: For A Network Twain Scanner

    Original Orientation and Scan Area B When originals of the same For a Network TWAIN Scanner width and different length are placed, select [On] using { { { { U U U U } } } } or A A A A { { { { T T T T } } } } , and then press the { { { { OK} } } } Open the scanner properties dia- key.

  • Page 40: Scanning Originals In Several Times Using The Exposure Glass

    Setting Originals Scanning Originals in Several Times using the Exposure Glass A A A A F F F F Place the originals. After all originals are scanned, press the { { { { #} } } } key. Reference Sending will start. p.27 “Placing Originals”...

  • Page 41: Preparation For Sending By E-Mail

    4. Sending Scan Files by E-mail Scan files can be sent from this machine to a specified destination using e-mail. This chapter explains the preparation for sending scan files by e-mail, various display screens, procedures for sending, and how to check the sending result when this function is used.

  • Page 42: E-Mail Screen

    Sending Scan Files by E-mail E-mail Screen These screens are shown when using the machine for e-mail . ❖ ❖ ❖ ❖ Main display AAH018S ❖ ❖ ❖ ❖ When a destination is selected. AAH025S E-mail icon ( ) [Manual] Indicates that the E-mail screen is dis- When specifying a destination that is played.

  • Page 43: Sending Scan Files By E-Mail

    Sending Scan Files by E-mail Sending Scan Files by E-mail D D D D Make sure that no previous set- Procedure for Sending by E- tings remain. mail Note ❒ If a previous setting remains, Scan files are sent after specifying press the { { { { Clear Modes} } } } key.
  • Page 44 Sending Scan Files by E-mail Using a Quick Dial key to select a Searching to select a destination destination by name A Press the Quick Dial key in A Press the { { { { Search Destination} } } } which the destination is regis- key.
  • Page 45 Sending Scan Files by E-mail D Select the destination using C Select the destination using { { { { U U U U } } } } or { { { { T T T T } } } } , and then press the { { { { U U U U } } } } or { { { { T T T T } } } } , and then press the { { { { OK} } } } key.
  • Page 46 Sending Scan Files by E-mail C Enter a 3-digit registration B Select [Search by E-mail Address] using { { { { U U U U } } } } or { { { { T T T T } } } } , and then number that has been assigned press the { { { { OK} } } } key.
  • Page 47 Sending Scan Files by E-mail Manual entry of an e-mail Checking selected destinations address A Check the selected destina- A Press [Manual]. tions in the Destination field. B Enter the e-mail address. Note ❒ When multiple destinations are selected, the selected des- tinations are displayed in the order they were selected by pressing { { { { U U U U } } } } or { { { { T T T T } } } } .

  • Page 48: Registration Number

    Sending Scan Files by E-mail H H H H Specify the e-mail sender. Using a Quick Dial key to select a sender To specify a sender, you can select it using the Quick Dial key, search A Press the Quick Dial key in for and select it from the Destina- which the sender is registered.
  • Page 49 Sending Scan Files by E-mail C For receiving a return receipt B Select [Search by Name] using { { { { U U U U } } } } or { { { { T T T T } } } } , and then press the confirmation, select [On] using { { { { U U U U } } } } or { { { { T T T T } } } } , and then press the { { { { OK} } } } key.
  • Page 50 Sending Scan Files by E-mail Note Selecting a sender from ❒ When a sender's password is Destination List set, a screen for entering the A Press the { { { { Search Destination} } } } sender's password appears. Enter the sender's password key.
  • Page 51 Sending Scan Files by E-mail D Press the { { { { OK} } } } key. Searching to select a sender using a registration number A Press the { { { { Search Destination} } } } key. Search Check Destination Destination...
  • Page 52 Sending Scan Files by E-mail Note Searching to select a sender by ❒ When a sender's password is e-mail address set, a screen for entering the A Press the { { { { Search Destination} } } } sender's password appears. Enter the sender's password key.
  • Page 53 Sending Scan Files by E-mail D Select the sender using { { { { U U U U } } } } or Note { { { { T T T T } } } } , and then press the { { { { OK} } } } ❒...
  • Page 54 Sending Scan Files by E-mail B Select a subject using { { { { U U U U } } } } or Manual entry of a subject { { { { T T T T } } } } , and then press the { { { { OK} } } } key.

  • Page 55: Checking The Status Of E-Mail

    Checking the Status of E-mail Checking the Status of E-mail A A A A The status of the last 50 sendings can Press the { { { { Job Information} } } } key. be checked. For every new sending record after 50, the oldest record is Search Check...
  • Page 56 Sending Scan Files by E-mail...

  • Page 57: Using The Network Delivery Scanner Function

    5. Using the Network Delivery Scanner Function Scan files can be sent to a specified destination using the network delivery scan- ner function. This chapter explains the preparation sequence, various display screens, delivery procedures, and how to check the delivery result when this function is used.

  • Page 58: Network Delivery Scanner Screen

    Using the Network Delivery Scanner Function On the client computers, install the application required for viewing or retrieving files by connecting to the delivery server, Install Client Computer such as DeskTopBinder Lite. Software See p.22 “DeskTopBinder Lite”. Network Delivery Scanner Screen These screens are shown when using the machine as a network delivery scanner.
  • Page 59 Preparation for Delivering [Add Dest] When selecting multiple destinations after a manual entry of a e-mail ad- dress, press [Add Dest], and then enter the e-mail address of the destination. [EditDest] When changing the e-mail address that has been entered, press [EditDest], and then re-enter the e-mail address.

  • Page 60: Delivering Scan Files

    Using the Network Delivery Scanner Function Delivering Scan Files D D D D Make sure that no previous set- Delivery Procedure tings remain. Scan files are delivered after scan set- Note tings and destinations are specified. If ❒ If a previous setting remains, necessary, you can select a sender and press the { { { { Clear Modes} } } } key.
  • Page 61 Delivering Scan Files Note Searching to select a destination ❒ When using the ScanRouter de- by name livery software , the Destination A Press the { { { { Search Destination} } } } List is updated automatically. key. Using a Quick Dial key to select a Search Check destination...
  • Page 62 Using the Network Delivery Scanner Function D Select the destination using C Select the destination using { { { { U U U U } } } } or { { { { T T T T } } } } , and then press the { { { { U U U U } } } } or { { { { T T T T } } } } , and then press the { { { { OK} } } } key.
  • Page 63 Delivering Scan Files C Enter a 3-digit registration B Select [Search by Comment] us- ing { { { { U U U U } } } } or { { { { T T T T } } } } , and then press number that has been assigned the { { { { OK} } } } key.
  • Page 64 Using the Network Delivery Scanner Function Note Manual entry of a destination ❒ To deselect a destination, press { { { { U U U U } } } } or { { { { T T T T } } } } to display Note the destination in the Desti- ❒...
  • Page 65 Delivering Scan Files C For receiving a return receipt Note confirmation, select [On] using ❒ When a sender is selected, { { { { U U U U } } } } or { { { { T T T T } } } } , and then press the the sender name is automati- { { { { OK} } } } key.
  • Page 66 Using the Network Delivery Scanner Function C Enter the beginning of the F For receiving a return receipt sender name, and then press conformation, select [On] using the { { { { OK} } } } key twice. { { { { U U U U } } } } or { { { { T T T T } } } } , and then press the { { { { OK} } } } key.
  • Page 67 Delivering Scan Files B Select [Display Destination List] Note using { { { { U U U U } } } } or { { { { T T T T } } } } , and then ❒ When [On] is selected, an e- press the { { { { OK} } } } key.
  • Page 68 Using the Network Delivery Scanner Function H H H H C Enter a 3-digit registration Specify a subject if necessary. number that has been assigned A Press [Options]. to a sender using the number keys, and then press the { { { { OK} } } } B Select[Attach Subject] using { { { { U U U U } } } } or { { { { T T T T } } } } , and then press the { { { { OK} } } } key twice.

  • Page 69: When Selecting A Subject From The List

    Delivering Scan Files B Enter a subject, and then press B Select a subject using { { { { U U U U } } } } or the { { { { OK} } } } key. { { { { T T T T } } } } , and then press the { { { { OK} } } } key.

  • Page 70: Checking The Status Of Delivery

    Using the Network Delivery Scanner Function Checking the Status of Delivery A A A A The status of the last 50 deliveries can Press the { { { { Job Information} } } } key. be checked. For every new delivery record after 50, the oldest record is Search Check...

  • Page 71: Using The Network Twain Scanner Function

    6. Using the Network TWAIN Scanner Function This chapter describes the operations for scanning originals with the network TWAIN scanner using DeskTopBinder Lite. In addition, the preparation for us- ing the network TWAIN scanner and some functions of the TWAIN driver are introduced.

  • Page 72: Scanning Originals

    Using the Network TWAIN Scanner Function Scanning Originals This section explains how to scan Note originals using the network TWAIN ❒ The name of the scanner cur- scanner function. rently being used is shown A A A A on the title bar of the dialog Start DeskTopBinder Lite, and bo x.
  • Page 73 Scanning Originals Note Note ❒ For advanced settings, click ❒ Depending on the scanning [Detail] to display the Detail resolution, the area to be window. For information scanned may be subject to re- about the Detail window, see strictions. TWAIN driver Help. C Click [Close].

  • Page 74: Functions Of The Twain Driver

    Using the Network TWAIN Scanner Function Functions of the TWAIN Driver The following is an introduction to the various functions of the TWAIN driver: ❖ ❖ ❖ ❖ Automatic Tilt Correction This function automatically cor- rects character strings that were scanned slanted.

  • Page 75: Appendix

    7. Appendix Relationship between Resolution and File Size Resolution and scan area are inversely related. The higher the resolution is set, the smaller the area that can be scanned. Conversely, the larger the scan area, the lower the resolution that can be set. The relationship between the scanning resolution and the file size is shown be- low.

  • Page 76: Max. Number Of Addresses Which Can Be Specified

    Appendix Max. Number of Addresses Which Can Be Specified E-mail Delivery Server The number of addresses which can be specified at a time when sending The number of addresses which can be See the manuals for the registered in the list ScanRouter Delivery soft- ware The max.

  • Page 77: Troubleshooting

    Troubleshooting Troubleshooting This section contains advice on what to do if you have problems scanning an original, or if the network delivery scanner or e-mail function does not work. Various messages that may appear on the control panel or client computer are listed, along with causes and solutions.

  • Page 78: When An Error Message Appears On The Control Panel

    Appendix When an Error Message Appears on the Control Panel Note ❒ If an error message that is not included in this section appears, turn off the main power switch of the machine, and then turn it on again. If the message still appears, note the content of the message and the error number (if listed in the table), and contact your service representative.
  • Page 79 Troubleshooting Message Causes and solutions Because the number of pages has Exceeded max. page capacity. Do you reached the maximum number that want to send the scanned data? Scanned data will be cleared when selecting can be sent, the data up to this point is sent.

  • Page 80: When An Error Message Appears On The Client Computer

    Appendix Message Causes and solutions The group contains members whose Specified group contains some invalid e-mail addresses are not registered. dest. Do you want to select only valid Please check the e-mail addresses of dest.? the group and make selections again. If a destination or a sender's name Updating destination list.
  • Page 81 Troubleshooting Message Causes and solutions [Clear Misfeed(s) in ADF.] Remove the jammed originals. When origi- nals are misfed, place them again. Check whether the originals are suitable to be scanned by the machine. [Communication error has occurred on the network.] Check whether the client computer can use the TCP/IP protocol.
  • Page 82 Appendix Message Causes and solutions [Scanner is in use for other function. Please wait.] A function of the machine other than the scanner function is being used such as the copier function. Wait for a while and recon- nect. [Scanner is not available. Check the scanner connec- •...

  • Page 83: Specifications

    Specifications Specifications Scan method Flatbed scanning Scan speed • E-mail/Network Delivery Scanner Approx.43 pages/minute [Scan size:A4R, Original type: Text(Print), Resolution: 200dpi, Compression: On (MH), Document feeder: ADF, ITU-T No.1 Chart] • TWAIN Scanner Approx.25 pages/minute [Scan size:A4R, Colors/Gra- dations:Binary, Resolution: 200dpi, Select device data compression (Binary/Halftone): Data compression (MMR), Document feeder: ADF, ITU-T No.1 Chart] Maximum power consumption...

  • Page 84: Index

    INDEX Automatic Tilt Correction , 68 E-mail , 35 Auto run program , 17 E-mail Informatn. Language , 15 E-mail Screen , 36 Checking the status of delivery , 64 Checking the Status of E-mail , 49 File Type Priority , 14 Compression , 14 Functions of the TWAIN Driver , 68 Control Panel , 6...
  • Page 85 Placing Originals , 27 Save , 67 Placing on the exposure glass , 28 Scanner Features , 9 Placing original in the Auto Document Setting procedure , 10 Feeder (ADF) , 29 Scanning mode registration , 68 Preparation for Delivering , 51 Scanning originals , 66 Preparation for Sending by E-mail , 35 Scanning Originals in Several Times using...
  • Page 86 B263-8581...
  • Page 87 In accordance with IEC 60417, this machine uses the following symbols for the main power switch: a means POWER ON. c means STAND BY. Declaration of Conformity “The Product complies with the requirements of the EMC Directive 89/336/EEC and its amending di- rectives and the Low Voltage Directive 73/23/EEC and its amending directives.”...
  • Page 88 GB GB B263-8581...

Table of Contents