Ricoh 2015 General Settings Manual page 717

- Setting Protocols -
- -
The protocols described in this sec-
tion provide various functions that
can be used on the machine.
Important
❒ If a protocol is disabled or inactive,
functions provided by that proto-
col cannot be used.
Reference
For more information about set-
ting protocols, consult your net-
work administrator.
❖ ❖ ❖ ❖ TCP/IP
• Functions using
rsh/rcp, diprint, http, ipp, web,
wins, ip1394, snmp
*1
SNMP session using TCP/IP
*2
SMB session using TCP/IP
Note
❒ You cannot switch between pro-
tocols, but turning off or disa-
bling TCP/IP will also disable
smtp and dns.
❖ ❖ ❖ ❖ AppleTalk
• Printer function using Apple-
Talk under Macintosh
Note
❒ This can be configured when a
module supporting PostScript 3
is installed in the machine.
❖ ❖ ❖ ❖ NetWare
❖ ❖ ❖ ❖ SMB
ftp, lpr,
❖ ❖ ❖ ❖ SCSI print
*1 *2
, or smb
❖ ❖ ❖ ❖ IP1394
❖ ❖ ❖ ❖ LPR
❖ ❖ ❖ ❖ FTP
Remote Maintenance by telnet
• Printer function using NetWare
server
Note
❒ In a PureIP environment, you
can use only the print server
even if this protocol has been
turned off or disabled.
❒ Turning off or disabling Net-
W a r e w i l l a l s o d i s a b le t h e
SNMP session using IPX/SPX.
• Printer function using SmartDe-
viceMonitor for Client
• Printer function using Microsoft
Windows Network
• Printer function using the IEEE
1394 interface (SCSI print)
• Printer function using the IEEE
1394 interface (IP over 1394)
• Printer function using standard
TCP/IP
• Printer function using the com-
mand line
• Printer function using the com-
mand line
• Scanner function using the de-
livery server
• Function to obtain device infor-
mation using the command line
9
95