Entering An E-Mail Address; Using The Destination List - Ricoh 2015 General Settings Manual

Entering an E-mail Address

When using Internet Fax transmis-
sion, specify the e-mail address in
place of the fax number.
Note
❒ You can enter up to 128 characters.
A A A A
Make sure that
the destination display column.
Note
❒ If it is not displayed, press
[ ].
B B B B
Press [Manual].
C C C C
Enter the e-mail address destina-
tion, and then press the { { { { OK} } } } key.
Note
❒ If you make a mistake, press the
{ { { { Clear/Stop} } } } key, and then enter
again.
❒ To change the e-mail address af-
ter pressing the { { { { OK} } } } key, press
[EditDest], re-enter an e-mail ad-
dress, and then press the { { { { OK} } } }
key.
is displayed in
Reference
"Entering Text", General Set-
tings Guide
The destination is specified.

Using the Destination List

You can program up to 150 destina-
tions (fax numbers and e-mail ad-
dresses) into the destination list. The
destinations programmed into desti-
nation numbers 001 to 032 can be
specified by pressing Quick Dial keys
01 to 32. Hence, you should program
frequently used destinations in the
Quick Dial keys. In a Quick Dial key,
you can program a single destination
or multiple destinations (fax numbers
and/or e-mail addresses). A Quick
Dial key programmed with multiple
destinations is called a Group Dial.
You can send (broadcast) the same
message to the destinations in the
Group Dial.
You can also program a name for a
Quick Dial key (for example "Brown",
or "Branch Office") that will appear
before you press the { { { { Start} } } } key to
start sending.
Preparation
In the destination list, program in-
dividual fax numbers, e-mail ad-
d r e s s e s a n d / o r g r o u p s o f
destinations. See "Registering a
Fax Destination", "Registering an
E-mail Destination", and "Regis-
tering a New Group", General Set-
tings Guide.
Specifying a Destination
2
31