Preset R/E Priority; Duplex Margin; Rotate Sort; Rotate Sort:auto Continue - Ricoh 2015 General Settings Manual

Preset R/E Priority

You can set the ratio with priority
when [R/E] is selected.
Note
❒ Default:
• Metric version: 71%
• Inch version: 65%

Duplex Margin

You can specify left margin on the
back side of copies, and top margin
on the front side. Select [Top Margin] or
[Left Margin], and then set the required
value.
• Top Margin: 0 - 50 mm, 0" – 2"
• Left Margin: 0 - 50 mm, 0" – 2"
Limitation
❒ Available only for Type 3
Note
❒ Default:
• Metric version: 5 mm
• Inch version: 0.2 inch

Rotate Sort

You can select a Sort function: [On] or
[Off].
When you select [On], you can select
[Rotate Sort]. See p.30 "Sort".
When you select [Off], you cannot se-
lect [Rotate Sort]. If you press the
{ { { { Sort} } } } key, only Sort is enabled.
Note
❒ Default: Off
❒ When using Type 1 without the
optional tray, you cannot use this
setting.
Settings You Can Change with User Tools

Rotate Sort:Auto Continue

If you select [Off] when the paper tray
in use runs out of paper, the machine
stops, allowing you to add paper so
all copies can be rotate-sorted.
Note
❒ Default:Off
❒ When using Type 1 without the
optional tray, you cannot use this
setting.

Letterhead Setting

If you select [On] for this function, the
machine rotates the image correctly.
Note
❒ Default: Off
❒ Orientation-fixed (top to bottom)
or two-sided paper (Type 3 only)
might not print correctly, depend-
ing on how the originals and paper
are placed.
Reference
When using letterhead paper,
check its orientation is correct. See
p.44 "Orientation-Fixed Paper or
Two-Sided Paper".
4
55