Using Smartdevicemonitor For Client - Ricoh 2015 General Settings Manual

Using SmartDeviceMonitor for Client

• Notification function
• An error message appears if there is an error on the specified printer
during transfer or printing of data.
• A window opens to notify you of print completion. You can also select
to be notified of the print condition, such as displaying the notice only
when Recovery Printing is executed.
• A completion message appears after printing, document storage, and
LAN-Fax transmission.
• Display an error message if an error occurs during printing or transmis-
sion of a print job.
• Monitoring function
• Check the equipment to give you information about printing, paper lev-
els, etc., via your computer.
• Simultaneously monitor multiple printers in use.
• Check the printer's network settings and detailed information of devic-
es.
• Check the print job log using the user ID.
• Receive the reports of print completion and document storage using the
6
printer function, and print completion, document storage and transmis-
sion by the LAN-Fax function.
• Display up to 100 print jobs.
Limitation
❒ Make the same settings for the option configuration of the printer for Re-
covery/Parallel Printing and the printer for giving print commands. If the
options necessary for printing, such as the paper feed unit, are not installed
on the substitute printer, that function is disabled.
❒ Load paper of the same size on both the printer for Recovery/Parallel
Printing and the printer for giving print commands. When specifying a
particular paper tray for printing, load paper of the same size into that tray.
❒ If the type and devices of the printer for Recovery/Parallel Printing and
the printer for giving commands are different, print results might not be
identical.
❒ If you select Sample Print or Locked Print, you cannot execute Recov-
ery/Parallel Printing.
Reference
For more information about using Recovery Printing/Parallel Printing, see
SmartDeviceMonitor for Client Help.
64