Removal Of Control System Fan - ABB IRC5 Product Manual

Removal of control system fan

The procedure below details how to remove the control system fan.
3HAC021313-001 Revision: K
Action
1.
DANGER!
Before any work inside the
cabinet, please observe the
safety information in section
DANGER - Make sure that the
main power has been switched
off! on page 28.
2. Remove the attachment screws
on the top cover.
3. Remove the top cover.
4. Disconnect the connector to the
fan.
5. Remove the screw (item B in
image below).
4 Repair activities, controller IRC5
4.7. Replacement of control system fan
Note/Illustration
xx0700000416
• A: fan
• B: top cover
• C: attachment screws (4 pcs)
Continued
Continues on next page
215