2 Installation and Commissioning, IRC5
2.9.7. Installation of Euromap and SPI
Continued
Installation of internal harness (Euromap 67) in the Dual Cabinet Controller
The following procedure details how to install the internal harness (Euromap 67) in the Dual
Cabinet Controller.
128
Action
1.
DANGER!
Before any work inside the cabinet, please
observe the safety information in section
DANGER - Make sure that the main power has
been switched off! on page
2.
esd
WARNING!
The unit is sensitive to ESD, before handling the
unit please observe the safety information in
section
WARNING - The unit is sensitive to
ESD! on page 29
3. Remove the original adapter plate on the front of
the controller.
4. Fit the included adapter plate.
Note/Illustration
28.
xx0600002652
•
•
xx0600002651
•
•
A: original adapter plate
B: attachment screw (8 pcs)
A
A: Euromap adapter plate
B: attachment screw (8 pcs)
Continues on next page
3HAC021313-001 Revision: K
B