Go Online And Start Wizard For Basic Commissioning - Siemens Sinamics G110M Original Instructions Manual

You have created your STARTER project.
5.2.7.3

Go online and start wizard for basic commissioning

Procedure
Proceed as follows to start the basic commissioning online with the converter:
1. Select your project and go online:
2. Select the device or the devices with which you wish
to go online.
3. Download the hardware configuration found online in
your project (PG or PC). STARTER shows you
which converter it is accessing online and which
offline:
②
③
4. When you are online, double-click on "Control Unit".
5. Start the wizard for basic commissioning.
You are online and have started basic commissioning.
SINAMICS G110M Operating Instructions
Operating Instructions, 04/2015, FW V4.7.3, A5E31298649B AD
The converter is online
The converter is offline
.
Commissioning
5.2 Basic commissioning
109