Functions
8.9 Application-specific functions
STARTER shows whether you change settings online in the inverter or change offline in the
PC (
You switch over the mode using the adjacent
buttons in the menu bar.
Procedure
To change over the units with STARTER, proceed as follows:
1. Select the configuration
2. Go to the "Units" tab in the configuration screen form to change over the units
3. Changing over the system of units
4. Select process variables of the technology controller
5. Adapting to the line supply
6. Save your set-
tings.
7. Go online.
The inverter
signals that
offline, other
units and pro-
cess variables
are set than in
the inverter
itself.
8. Accept these
settings in the
inverter.
You have changed over the units.
216
/
).
Operating Instructions, 04/2015, FW V4.7.3, A5E31298649B AD
SINAMICS G110M Operating Instructions