Siemens Sinamics G110M Original Instructions Manual page 76

Installation
4.3 Electrical Installation
Figure 4-19
Figure 4-20
Figure 4-21
76
Macro 29 - Conveyer with potentiometer and fixed setpoint (Default USS)
Macro 7 - Switch over between fieldbus and jogging using DI 3 (default DP/PN)
Macro 30 - ASi Single slave with fixed setpoints (default ASi)
SINAMICS G110M Operating Instructions
Operating Instructions, 04/2015, FW V4.7.3, A5E31298649B AD