Appendix; New And Extended Functions - Siemens Sinamics G110M Original Instructions Manual

Appendix

A.1

New and extended functions

Table A- 1 New functions and function changes in Firmware 4.7 SP3
Function
1 PM240-2 Power Modules, frame sizes FSD and FSE are sup-
ported
The Safety Integrated basic function Safe Torque Off (STO) is
supported via the terminals of the PM240-2 Power Module,
frame sizes FSD and FSE
2 Revised PM230 Power Module with new Article numbers sup-
ported:
IP55 degree of protection: 6SL3223-0DE . . - . . G .
•
IP20 degree of protection and Push Through: 6SL321 . -
•
1NE . . - . . G .
The Safety Integrated basic function Safe Torque Off (STO) is
supported with the revised PM230 Power Module
3 PM330 Power Module, frame size HX is supported
4 1FP1 reluctance motors are supported
5 Encoderless 1FK7 synchronous motors are supported
6 Encoderless 1FG1 geared synchronous motors are supported
7 SINAMICS "Standard Drive Control" and "Dynamic Drive Con-
trol" application classes to simplify commissioning and increase
the degree of ruggedness of the closed-loop motor control.
The SINAMICS application classes are available with the fol-
lowing inverters:
SINAMICS G120C
•
SINAMICS G120 with PM240, PM240-2 and PM330 Power
•
Modules
8 Moment of inertia estimator with moment of inertia precontrol to
optimize the speed controller in operation
9 Friction torque characteristic with automatic plotting to optimize
the speed controller
10 Automatic optimization of the technology controller
SINAMICS G110M Operating Instructions
Operating Instructions, 04/2015, FW V4.7.3, A5E31298649B AD
SINAMICS
G120
- - ✓ ✓ ✓
- - - - ✓
- - ✓ ✓ ✓
- - - - ✓
- - ✓ - -
- - ✓ - -
- ✓ - ✓ ✓
- ✓ - ✓ ✓
- ✓ ✓ ✓ ✓
✓ ✓ - ✓ ✓
✓ ✓ - ✓ ✓
- - ✓ ✓ ✓
A
G120D
✓ - - -
✓ - - -
- - - -
- - - -
- - - -
- - - -
✓ ✓ - -
1)
✓ ✓ - -
✓ - - -
✓ ✓ ✓ ✓
✓ ✓ ✓ ✓
- - - -
311