Sinamics G110M Converter - Siemens Sinamics G110M Original Instructions Manual

Description

3.2 SINAMICS G110M converter

3.2 SINAMICS G110M converter
Overview
The SINAMICS G110M system consists of the following components:
● Terminal Housing (including the Control Module)
● Power Module
● Three-phase motor.
The Power Modules are designed for a specific power range and the terminal housings are
designed to work with specific motors. The terminal housing not only allows the direct
mounting onto a motor but specific cable glands and mains connectors are specified. All the
various combinations of Power Modules, terminal housings (including the Control Modules)
and Options are given in the tables below.
Converter has the potential to start running of a PLC power-cycle
The converter has the potential to start running after a power-cycle of the controlling PLC, if
an ON command was present prior to the power-cycle of the PLC.
It is the users responsibility to ensure that the converter runs only when it is appropriate of
the user's application.
Table 3- 1 PM240M Power Modules - 3AC, 400 V, Class A, IP66
Frame size
FSA
FSA
FSA
FSA
FSB
FSB
FSB
24
CAUTION
Rated output power (kW) Rated output current (A)
based on High Overload (HO)
0.37
0.75
1.1
1.5
2.2
3.0
4.0
1.3
2.2
3.1
4.1
5.6
7.3
8.8
Operating Instructions, 04/2015, FW V4.7.3, A5E31298649B AD
Article number
6SL3517-1BE11-3AM0
6SL3517-1BE12-3AM0
6SL3517-1BE13-3AM0
6SL3517-1BE14-3AM0
6SL3517-1BE16-3AM0
6SL3517-1BE17-7AM0
6SL3517-1BE21-0AM0
SINAMICS G110M Operating Instructions