Siemens Sinamics G110M Original Instructions Manual page 37

Figure 4-2 Terminal housing dimensions
Motor dimensions
There are a large number of motors associated with the G110M system, with each motor
being uniquely configured for the user requirements.
To ensure that the correct motor is selected the following sources of information should be
consulted:
● The relevant system catalog, for example the SINAMICS G120 catalog.
● The relevant motor catalog.
● The Siemens "Configurator" online software application for dimensioning motors
(Siemens motor configurator
(https://eb.automation.siemens.com/goos/catalog/Pages/ProductData.aspx?catalogRegio
n=WW&language=en&nodeid=10028832&tree=CatalogTree&regionUrl=%2F&autoopen=
false&activetab=product#topAnch&activetab=config&))
The "Configurator" tool allows the user to precisely configure a motor with all the accessories
and options that are required, then generate dimensional data, including 2D and 3D CAD
models, which can be downloaded to the users local system.
The figure below shows an example of the type of data available.
SINAMICS G110M Operating Instructions
Operating Instructions, 04/2015, FW V4.7.3, A5E31298649B AD
Installation
4.1 Mechanical Installation
37