Basic Commissioning With Starter - Siemens Sinamics G110M Original Instructions Manual

Commissioning
5.2 Basic commissioning
Figure 5-23
5.2.7

Basic commissioning with STARTER

PC-based commissioning tools
STARTER and Startdrive are PC tools to commission Siemens inverters. The graphic user
interface supports you when commissioning your inverter. Most of the inverter functions are
available in screen forms.
The screen forms that are shown in this manual show generally valid examples. The number
of setting options available in screen forms depends on the particular inverter type.
Preconditions for commissioning
106
Macro 34 - ASi Dual slave with setpoint
You can access the inverter with STARTER or Startdrive either
via a USB connection or via the fieldbus.
System requirements and download:
• Adapting the USB interface (Page 107)
• Download STARTER
(http://support.automation.siemens.com/WW/view/en/26233
208)
SINAMICS G110M Operating Instructions
Operating Instructions, 04/2015, FW V4.7.3, A5E31298649B AD