Harness Guide - Toshiba e-STUDIO556 Service Manual

(3) Disconnect 1 connector. Take off the harness
clamp. Remove 4 screws and take off the
RADF board bracket.

4.12.55 Harness guide

(1) Take off the RADF rear cover.
( P.4-117 "4.12.3 RADF rear cover")
(2) Remove the harnesses from the harness
guide.
(3) Remove 3 screws and take off the harness
guide.
© 2012 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-459
Fig. 4-460
4 - 161
e-STUDIO556/656/756/856(Ver03)
DISASSEMBLY AND REPLACEMENT
4