Pressure Roller Thermistor (Thm4) - Toshiba e-STUDIO556 Service Manual

Multifunctional digital systems

Hide thumbs Also See for e-STUDIO556:

Table of Contents

Disconnect 1 connector to take off the fuser

transport sensor.

4.10.12 Pressure roller thermistor (THM4)

Take off the fuser unit.

P.4-96 "4.10.2 Fuser unit")

Disconnect 1 connector of the pressure roller

Remove 2 screws to take off the lower

entrance guide.

Remove 1 screw to take off the harness

Remove 1 screw to take off the pressure

roller thermistor.

1. Use tightening torques of 0.4-0.6 N-m to

prevent the thermistors from damage.

2. Be sure that the thermistor is contacting

with the pressure roller when it has been

3. When installing, be careful not to deform

the thermistor.

e-STUDIO556/656/756/856(Ver03)

DISASSEMBLY AND REPLACEMENT

Fuser transport sensor

Pressure roller thermistor

Harness cover

Table of Contents