Toshiba e-STUDIO556 Service Manual page 827

(6) Select the item with the digital keys.
"*" is displayed next to the selected item. Display or delete the "*" by pressing the number of the
item.
1. SYSTEM FIRMWARE (OS Data)
2. SYSTEM SOFTWARE (HD Data)
3. LASER FIRMWARE
4. PFC FIRMWARE
5. ENGINE FIRMWARE
6. SCANNER FIRMWARE
7. RADF FIRMWARE
(7) Press the [START] button.
Updating starts and the processing status is displayed on the LCD screen.
Status display during update
SYSTEM FIRMWARE (OS Data)
update in progress
SYSTEM SOFTWARE (HD Data)
update in progress
LASER FIRMWARE
PFC FIRMWARE
ENGINE FIRMWARE update in progress
SCANNER FIRMWARE. update in progress
RADF FIRMWARE
(8) "Update Completed." is displayed at the bottom of the LCD screen after the updating is
completed properly.
© 2012 TOSHIBA TEC CORPORATION All rights reserved
Item
Updating OS data
Updating Master data
Updating Laser ROM
Updating PFC ROM
Updating Engine ROM
Updating Scanner ROM
Updating RADF ROM
SYSTEM FIRMWARE (OS Data)
SYSTEM SOFTWARE (HD Data)
update in progress LASER FIRMWARE
update in progress PFC FIRMWARE
ENGINE FIRMWARE
SCANNER FIRMWARE
update in progress RADF FIRMWARE
Fig. 11-3
11 - 9
Remarks
Status display when update is completed
e-STUDIO556/656/756/856(Ver03)
Completed
Completed
Completed
Completed
Completed
Completed
Completed
FIRMWARE UPDATING
11