Original Reverse Solenoid (Solr2) - Toshiba e-STUDIO556 Service Manual

4.12.32 Original reverse solenoid (SOLR2)

(1) Take off the RADF rear cover.
( P.4-117 "4.12.3 RADF rear cover")
(2) Disconnect 1 connector.
(3) Remove 2 screws and take off the original
reverse solenoid with the bracket.
(4) Remove 2 screws and take off the bracket
from the original reverse solenoid.
Note:
Before taking off the solenoid, read the scale.
When reinstalling, align it with the
corresponding position on the scale.
e-STUDIO556/656/756/856(Ver03)
DISASSEMBLY AND REPLACEMENT
© 2012 TOSHIBA TEC CORPORATION All rights reserved
4 - 146
Fig. 4-414
Fig. 4-415
Fig. 4-416