Fine Adjustment Of Black Density - Toshiba e-STUDIO556 Service Manual

6.6.7

Fine adjustment of black density

The density of black side on scanned image is adjusted at color-scanning.
Original mode
Text/
Text Photo
Photo
8314 8315
Note:
Be careful for the value not to be too large since the gradation is reproduced worse in darkerside.
<Procedure>
Procedure is same as that of
6.6.8 RGB conversion method selection
The color space conversion method of image is decided at color-scanning.
Original mode
Text/
Text Photo
Photo
8319 8320
<Procedure>
Procedure is same as that of
6.6.9 Adjustment of saturation
The saturation of the scanned image is adjusted for color-scanning.
Original mode
Text/
Text Photo
Photo
8324 8325
<Procedure>
Procedure is same as that of
e-STUDIO556/656/756/856(Ver03)
ADJUSTMENT
Item to be
User
adjusted
Custom
8316 8371 Fine adjustment of
black densityt
P.6-35 "6.6.2 Density adjustment".
Item to be
User
adjusted
Custom
8321 8372 RGB conversion
method selection
P.6-35 "6.6.2 Density adjustment".
Item to be
User
adjusted
Custom
8326 8373 Adjustment of
saturation
P.6-35 "6.6.2 Density adjustment".
The larger the value is, the black side of the
image becomes darker.
Acceptable values: 0 to 4 (Default: 0).
0: sRGB
1: AppleRGB
2: ROMMRGB
3: AdobeRGB
(Default: 0).
The larger the value is, the brighter the image
becomes.
The smaller the value is, the duller the image
becomes.
Acceptable values: 0 to 255 (Default: 128)
© 2012 TOSHIBA TEC CORPORATION All rights reserved
6 - 38
< Adjustment Mode (05) >
Remarks
< Adjustment Mode (05) >
Remarks
< Adjustment Mode (05) >
Remarks