Functions - Toshiba e-STUDIO556 Service Manual

HDD Assist Mode
Current HDD type: SATA HDD
Select number (1-2) and press START key
1. Revert factory initial status HDD
2. Remove key
Remark:
If the HDD type cannot be identified, "Unknown HDD" may appear on the screen.
Refer to P.8-127 " [F106_1] ADI-HDD error: HDD type detection error"
Note:
When "SATA HDD" (normal HDD) is displayed, items 1 and 2 are not selectable. If you select
any of 1 and 2 and press the [START] button, the error message below appears.
HDD Assist Mode
Current HDD type: SATA HDD
Select number (1-2) and press START key
1. Revert factory initial status HDD
=>
2. Remove key
Operation Failed.
Press SoftPower Key to Switch Off
5.10.3

Functions

[A] 1. Revert factory initial status HDD
Select this to dispose of the HDD as well as the equipment.
e-STUDIO556/656/756/856(Ver03)
SELF-DIAGNOSTIC MODE
System Firmware Version
Update Mode
Fig. 5-8
System Firmware Version
Update Mode
Fig. 5-9
© 2012 TOSHIBA TEC CORPORATION All rights reserved
5 - 20
: xxxx(x.x.x.x)
: 4c Mode
: xxxx(x.x.x.x)
: 4c Mode