System List - Toshiba e-STUDIO556 Service Manual

2.3

System List

* The finisher (MJ-1027/1028/1029) is necessary for the installation of the hole punch unit (MJ-
6003N/E/F/S) and the inserter (MJ-7001).
* The Printer kit (GM-1250), Printer/Scanner kit (GM-2270) and Scanner kit (GM-4250) are optional
for TWD/SAD/ASD/AUD model.
* The antenna (GN-3010) is necessary to enable the wireless LAN module (GN-1060).
* Up to 2 antennas (GN-3010) can be connected to the wireless LAN module (GN-1060).
* When the wireless LAN module (GN-1060) is installed, antenna (GN-3010) can be connected.
© 2012 TOSHIBA TEC CORPORATION All rights reserved
Fig. 2-1
SPECIFICATIONS/ACCESSORIES/OPTIONS/SUPPLIES
2 - 17
e-STUDIO556/656/756/856(Ver03)
2