System Control Pc Board (Sys Board) - Toshiba e-STUDIO556 Service Manual

(5) Release the harness from harness clamp to
take off the SYS board cover by sliding it
upward.
Note:
A cooling fan is installed on the SYS board
cover. Therefore be sure not to pull the
harnesses connecting to the fan.
9.1.2

System control PC board (SYS board)

(1) Take off the SYS board cover.
P.9-1 "9.1.1 SYS board cover"
(2) Remove 4 screws to take off the leaf spring.
(3) Disconnect 8 connectors of the SYS board.
(4) Remove 2 screws to take off the SYS board
[9.1.2].
e-STUDIO556/656/756/856(Ver03)
REPLACEMENT OF PC BOARDS / HDD
Leaf spring
© 2012 TOSHIBA TEC CORPORATION All rights reserved
9 - 2
Fig. 9-3
Fig. 9-4
[9.1.2]
Fig. 9-5