11.5.3
Scanner ROM
Important:
•
Be sure to shut down the equipment before installing and removing the download jig.
•
Do not shut down the equipment during the update. The data could be damaged and not be
able to be operated properly.
[A] Update Procedure
(1)
Install the ROM to the download jig (K-PWA-DLM-320).
Make sure the direction is correct.
(2)
Press the [ON/OFF] button on the control panel to shut down the equipment.
(3)
Take off the top right cover.
(4)
Take off the right upper cover.
(5)
Remove the cover plate.
© 2012 TOSHIBA TEC CORPORATION All rights reserved
Top right cover
Fig. 11-14
Right upper cover
Fig. 11-15
11 - 37
e-STUDIO556/656/756/856(Ver03)
FIRMWARE UPDATING
11