Reverse Motor [M19] - Toshiba e-STUDIO556 Service Manual

4.11.9

Reverse motor [M19]

(1) Take off the reverse section driving unit.
( P.4-112 "4.11.8 Reverse section driving
unit / Reverse motor driving PC board
(MOT2-RV board)")
(2) Disconnect 1 connector, remove 2 screws
and then take off the reverse motor.
4.11.10 Reverse roller-1 / Reverse roller-2
(1) Take off the reverse section driving unit.
( P.4-112 "4.11.8 Reverse section driving
unit / Reverse motor driving PC board
(MOT2-RV board)")
(2) Take off the reverse motor.
( P.4-113 "4.11.9 Reverse motor [M19]")
(3) Remove 2 E-rings, 2 gears and 2 belts.
(4) Remove 2 E-rings and 2 bearings to take off
the reverse roller-1.
(5) Remove 2 E-rings and 2 bearings to take off
the reverse roller-2.
© 2012 TOSHIBA TEC CORPORATION All rights reserved
Reverse motor
Fig. 4-316
Belt
Gear
Fig. 4-317
Reverse roller-2
Bearing
Fig. 4-318
4 - 113
Belt
Gear
Reverse roller-1
Bearing
e-STUDIO556/656/756/856(Ver03)
DISASSEMBLY AND REPLACEMENT
4