Exit Intermediate Roller - Toshiba e-STUDIO556 Service Manual

4.12.22 Exit intermediate roller

(1) Take off the exit/reverse guide.
( P.4-123 "4.12.11 Exit guide / Exit/reverse
guide / Reading end guide")
(2) Remove 2 screws and take off the guide.
(3) Remove 1 E-ring, 1 pulley, 1 pin and 1
bushing.
(4) Remove 1 E-ring and 1 bushing and take off
the exit intermediate roller.
e-STUDIO556/656/756/856(Ver03)
DISASSEMBLY AND REPLACEMENT
Bushing
E-ring
© 2012 TOSHIBA TEC CORPORATION All rights reserved
4 - 136
Fig. 4-386
Bushing
Pulley
Pin
E-ring
Fig. 4-387
Exit intermediate roller
Fig. 4-388