Art Edge Settings - Sony XVS-9000 User Manual

Art Edge Settings

Applying art edges
1
Open the DME >Edge >Art Edge menu (4114).
2
Press [Art Edge], turning it on.
Note
The Defocus, Blur, Key Border, and Glow effects
cannot be applied to the Art Edge sections.
3
Set the following parameters.
Parameter group [1/2]
No. Parameter Adjustment
1 H Simultaneously adjust width of left
and right edges
2 V Simultaneously adjust width of top
and bottom edges
3 All Simultaneously adjust width of all
four edges
5 Density Density of edges
Parameter group [2/2]
No. Parameter Adjustment
1 Top Width of top edge
2 Left Width of left edge
3 Right Width of right edge
4 Bottom Width of bottom edge
5 Density Density of edges
Adjusting the position of art edges
1
In the Art Edge menu (4114), press [Edge Position].
2
Set the following parameters.
No. Parameter Adjustment
1 Top Position of top edge
2 Left Position of left edge
3 Right Position of right edge
4 Bottom Position of bottom edge
5 All Adjust the position of all four edges
Example: Moving the right edge position in the "minus"
direction.
Position after
moving
Art edge portion
Softening the inner and outer sides of art
edges
1
In the Art Edge menu (4114), press [Soft], turning it
on.
2
Set the following parameters.
No. Parameter Adjustment
1 Inner H
2 Inner V
3 Outer H
4 Outer V
5 All
Setting the way in which art edge colors
change
1
In the <Art Edge Source> group of the Art Edge menu
(4114), select the color pattern to apply to the art
edges.
Flat Color: Uses color 1 (see page 232) as a flat color.
230
Moving in the minus
direction
Position before
moving
Simultaneously adjust softness of
left and right inner edges
Simultaneously adjust softness of
top and bottom inner edges
Simultaneously adjust softness of
left and right outer edges
Simultaneously adjust softness of
top and bottom outer edges
Simultaneously adjust softness of
all inner and outer edges.