Table of Contents
Advertisement
System cabling
...................................................................................................................................................................................................................................
Fiber cabling
Overview
Purpose
This section provides information on cabling SFPs.
Contents
Optical interfaces
SFP-155E cable
Optical interfaces (X5IP card)
Optical interfaces (X6STM1 card)
Aggregate interfaces (Main board)
Optical interfaces
Overview
There are four aggregate STM-n interfaces, 2 × STM-1 and 2 × STM-1/STM-4 (located
on the main board) and six tributary STM-1 interfaces (located on the X6STM1 option
card).
Optical connectors
All ports are SFP based. When equipped with optical SFPs, they provide LC connectors.
When equipped with electrical SFPs, they provide 1.0/2.3 coaxial connectors.
Specifications
The following types of interfaces are available:
• Aggregate interfaces:
– STM-1 short haul (S1.1)
– STM-1 long haul (L1.2)
– STM-1 middle range (L1.1)
– STM-4 short haul (S4.1)
– STM-4 long haul (L4.1)
– STM-4 long haul (L4.2)
• Tributary interfaces:
– STM-1 short haul (S1.1).
– STM-1 middle range (L1.1)
– STM-1 long haul (L1.2)
...................................................................................................................................................................................................................................
365-313-103R8.0
Issue 2 July 2009
Alcatel-Lucent – Internal
Proprietary – Use pursuant to Company instruction
Fiber cabling
Overview
4-31
4-33
4-33
4-35
4-36
4-31
Advertisement
Chapters
Table of Contents
