Table of Contents
Advertisement
Installation trouble shooting
...................................................................................................................................................................................................................................
Active store state
The following table shows the possible values:
Value
Store Active
Store Active ot Committed
Backup store state
The state of the backup store can have the following values:
Value
Store Error
Store Clearing
Store Empty
Store Downloading
Store Inactive
...................................................................................................................................................................................................................................
365-313-103R8.0
Issue 2 July 2009
Description
Memory contains a valid code that is being executed.
If no association is made between the management system and
the E after a software switch.
The software that was active before the switch is now in the
backup store. If the association is not made within 2 hours after
the switch, the system will switch the stores back so that the
previous active software is made active again. Therefore, it is
not wise to download software while the active store is in this
state.
Description
Memory has corrupted data.
After the download command has been given, the inactive store
is cleared first. When the backup store is in this state, the E
software download cannot be aborted. To abort the E software
download, wait until the backup store state is Store
Downloading.
The clearing of the store has been successful and new software
will now be downloaded.
Code is being downloaded to the memory.
Memory contains valid code that is not being executed.
Alcatel-Lucent – Internal
Proprietary – Use pursuant to Company instruction
Parameters for NE software installation
B-7
Advertisement
Chapters
Table of Contents
