Table of Contents
Advertisement
ITM-CIT installation and NE provisioning
...................................................................................................................................................................................................................................
The state of the association with the OMS is displayed. The possible states are described
in the table below:
Management state
ormal
Uploading
Resyncing
ReEvaluating
FaultStatus
Downloading
EMS connection state
Indicates wether an active connection (CMISE association) exist to the element manager
(OMS).
...................................................................................................................................................................................................................................
6-24
Description
ormal will be displayed whenever the automated management
operations have been completed. In other words, the OMS has
completed the MIB upload, MIB download, MIB resynchronization,
or reevaluation of fault status. The state can also be ormal when the
association between the ITM-CIT/OMS and the E has been lost.
The OMS is performing an MIB upload.
If the MIB of the E and the MIB image on the OMS are out of
synchronization, then the OMS invokes a resynchronization. The
management state shows the progress of this operation. If executed
properly, it should display, in order: ormal, Resyncing, ormal,
ReEvaluatingFaultStatus, ormal.
After a resynchronization, the OMS initiates a reevaluate fault status
operation.
A MIB download has been started by the OMS. The management state
is set to ormal during the downloading process. If the MIB download
is in progress when a loss of association occurs, then the management
state will remain Downloading.
Alcatel-Lucent – Internal
Proprietary – Use pursuant to Company instruction
Provisioning system parameters
Confirm/Update the MIB
365-313-103R8.0
Issue 2 July 2009
Advertisement
Chapters
Table of Contents
