Table of Contents
Advertisement
ITM-CIT installation and NE provisioning
...................................................................................................................................................................................................................................
NE date and time
Overview
This section provides a procedure for setting or changing the E date and time.
Before you begin
The current date and time information must be known. If there is an association with
OMS, then the date and time are automatically set when the association is established and
will be repeated every 24 hours (at night).
Procedure
Complete the following steps to set the E date and time:
...................................................................................................................................................................................................
Select
1
Result:
...................................................................................................................................................................................................
2
Click
Edit
Result:
...................................................................................................................................................................................................
3
Select the desired Edit Mode. Fill in the date and time (when the manual setting is
chosen) and click
Result:
E
N D
O F
...................................................................................................................................................................................................
Parameters
Date
This field is used to set the date when the manual setting edit mode is chosen.
Edit mode
There are two edit modes which provide a choice of methods by which the date and time
can be changed. The possible values are described in the table below.
Edit mode
Sync to CIT time
Manual set
...................................................................................................................................................................................................................................
365-313-103R8.0
Issue 2 July 2009
Management → Time
The E Date and Time window appears.
.
The Edit Date and Time window appears.
.
OK
The Edit Date and Time window disappears.
S T E P S
Description
The date and time are set automatically by using the local time and
date from the CIT (PC). This information is sent to the E and the
time and date are set.
The date and time must be set manually.
Alcatel-Lucent – Internal
Proprietary – Use pursuant to Company instruction
in the main menu.
Provisioning system parameters
NE date and time
6-15
Advertisement
Chapters
Table of Contents
