...................................................................................................................................................................................................................................

Installation of an option card

Overview

This section provides a procedure for upgrading the 1645 AMC with one of the option

cards. An overview about all available option cards is given in chapter 2, section

"Upgrade with option cards" (p.

Before you begin

Please read section

procedure described below.

Procedure

Proceed as follows to mount an option card:

...................................................................................................................................................................................................

Remove the top cover.

...................................................................................................................................................................................................

Remove the dummy panel fixed on the front.

...................................................................................................................................................................................................

Insert the option card (item 1) into P1 and/or P2 connectors. Make sure the connectors are

properly engaged and seated.

Important! Fit the X5IP option card by inserting at an angle the faceplate of the card

to the back of the AMC faceplate. Gently push the card towards the AMC faceplate to

slowly move the connectors into position.

...................................................................................................................................................................................................

Secure the option card with seven M3 × 6 screws as shown in

an AMC option card" (p.

...................................................................................................................................................................................................

Align and stick the function label delivered with the option card on the front plate.

...................................................................................................................................................................................................

IF ...

an X16E1-V3, X16DS1 or

X12SHDSL-V2 option card has

been installed,

any other option card type has been

installed,

N D

O F

...................................................................................................................................................................................................

365-313-103R8.0

Issue 2 July 2009

"Option card and SFP handling" (p. 2-9)

3-6).

S T E P S

Alcatel-Lucent – Internal

Proprietary – Use pursuant to Company instruction

2-7).

THEN ...

proceed with section

(p.

3-7).