Table of Contents
Advertisement
System cabling
...................................................................................................................................................................................................................................
SFP-155E cable
Purpose
The SFP-155E cable is used for connecting the 155 Mbit/s STM-1 electrical inputs and
outputs to the 1645 AMC E.
Cable data (75 , coaxial)
Figure 4-32 Cable design (STM-1e cable)
Table 4-17
Component
1.0/2.3 straight crimp
plug, push pull
1.0/2.3 75 ohm coax
Cables available for order (75 )
The following pre-configured cables can be ordered:
• STM-1e coax cable 5 m — CC408939205
• STM-1e coax cable 10 m — CC408939213
• STM-1e coax cable 15 m — CC408939221
• STM-1e coax cable 20 m — CC408939239
Optical interfaces (X5IP card)
Overview
Two aggregate STM-1 interfaces are available on the AMC main board and one-gigabit
interface is available on the X5IP option card.
The optical interfaces can be equipped with various SFPs (Small Form-Factor Pluggable
Optics). All SFPs are equipped with LC connectors. The following figure shows the
variable SFP module system.
...................................................................................................................................................................................................................................
365-313-103R8.0
Issue 2 July 2009
Components (STM-1e cable)
ITT Canon: D55-F24-3035GDA
Belden: BT3002 (H133T03)
Alcatel-Lucent – Internal
Proprietary – Use pursuant to Company instruction
Part Number
ITT Canon: D55-F24-3080GDA
exans: CX1
Fiber cabling
SFP-155E cable
4-33
Advertisement
Chapters
Table of Contents
