Alcatel-Lucent 1645 AMC Installation Manual page 103

System cabling
...................................................................................................................................................................................................................................
Specifications
The following SFPs are available:
• GE SX (CC109526483), 850 nm, multi-mode 550 m
• GE LX (CC109526491), 1310 nm, single-mode 5–10 km
• GE ZX (CC109534347), 1550 nm, single-mode 80 km
Optical interfaces (X6STM1 card)
Purpose
X6STM1 supports 6 x SFP cages and each can be equipped with various optical STM-1
SFP or electrical STM-1 SFP.
Connector data
All ports are SFP based (S1.1, L1.1, L1.2, and 155E).
Specifications
The following optical SFPs are available:
• S1.1 (CC109469809), short haul, 1300 nm, 15 km
• L1.1 (CC109469825), long haul, 1300 nm, 40 km
• L1.2 (CC109469817), long haul, 1500 nm, 80 km
• 155E (CC109543561), electrical
• SWF 1-1, (CC109559500), 1480/1500 nm, single fiber bidirectional
• SWF 1-2, (CC109559492), 1490/1310 nm, single fiber bidirectional.
The characteristics of the SFPs are summarized in the table below:
Table 4-18
Wavelength
Max. output power
Eye mask pattern
FDA class/IEC hazard level
Maximum dispersion
Attenuation range
Optical path penalty
Sensitivity
...................................................................................................................................................................................................................................
365-313-103R8.0
Issue 2 July 2009
Optical SFP specifications
S1.1
Transmitter
1270...1360 nm
–8...–15 dBm
see G.957
Class I/1
185 ps/nm
0...12 dB
< 1 dB
Receiver
–28 dBm min.
Alcatel-Lucent – Internal
Proprietary – Use pursuant to Company instruction
L1.1
1270...1360 nm
+0...–5 dBm
see G.957
Class I/1
246 ps/nm
10...28 dB
< 1 dB
–34 dBm min.
Fiber cabling
Optical interfaces (X5IP card)
L1.2
1530...1565 nm
+0...–5 dBm
see G.957
Class I/1
not applicable
10...28 dB
< 1 dB
–34 dBm min.
4-35