Alcatel-Lucent 1645 AMC Installation Manual page 86

System cabling
...................................................................................................................................................................................................................................
Table 4-8
Point on connector
Cable data
A standard LA cable (CAT5) can be used (100 Ω symmetrical).
Cable connection
Please connect the -LA cable as shown in the figure below:
Figure 4-16 Q-LAN cable
ote: The routing of the -LA cable should be in accordance with the
recommended practices of the cable selected. The cable should be strain relieved to
prevent any force from being exerted on the connectors.
...................................................................................................................................................................................................................................
4-18
Pin assignment (Q-LAN cable) (continued)
3 RX P
4 nc
5 nc
6 RX
7 nc
8 nc
Alcatel-Lucent – Internal
Proprietary – Use pursuant to Company instruction
Signal name
Receive-data positive
Receive-data negative
External cable installation
Q-LAN interface (OMS)
Description
ot connected
ot connected
ot connected
ot connected
365-313-103R8.0
Issue 2 July 2009