Alcatel-Lucent 1645 AMC Installation Manual page 135

Access multiplexer compact amc
Hide thumbs Also See for 1645 AMC:
Table of Contents

Advertisement

ITM-CIT installation and NE provisioning
...................................................................................................................................................................................................................................
Operation
When assigning units, an operation must be chosen. The choices are described in the table
below:
Operation
Assigned
Unassigned
Auto
Main unit
The unit provisioned or to be provisioned in the selected slot.
Upper/lower interface
The interfaces directly associated with the displayed Main Unit.
MIB state
The status of the MIB is indicated. The possible values are described in the table below:
MIB state
Empty
Filled
Filled Unknown
Filled ot Confirmed
...................................................................................................................................................................................................................................
365-313-103R8.0
Issue 2 July 2009
Description
Assigns the unit to the slot
The slot is configured to be empty. The E will not expect any unit to
be present in this slot.
Automatically assigns the unit to the slot once the E establishes the
presence of a unit of the correct type. Until this time, the slot acts as
Unassigned.
Description
An empty System Controller (SC) has been inserted or the MIB was
cleared after starting an MIB download automatically by the
management system. If the MIB state is empty, the management
system can proceed with the MIB download.
The E possesses a valid MIB which has been confirmed.
The E has a MIB, however, it is of unknown validity. This can occur,
for instance, if one SC is replaced by another SC having a MIB.
The E has a MIB, however, it has not yet been confirmed by the
ITM-CIT. The procedure
the steps necessary to confirm the MIB. Once confirmed, the state will
become Filled.
Alcatel-Lucent – Internal
Proprietary – Use pursuant to Company instruction
Provisioning system parameters
"Confirm/Update the MIB" (p. 6-22)
Node creation
gives
6-19

Advertisement

Table of Contents
loading

Table of Contents