Automatic Ip Address Ethernet Connection; Pppoe; Figure 8-3: Automatic Ip Address Wan Ethernet Connection; Figure 8-4: Pppoe Wan Ethernet Connection - AudioCodes MP-20 Series User Manual

User's Manual
8.1.1.2

Automatic IP Address Ethernet Connection

The procedure below describes how to connect to the Internet by automatically obtaining a
WAN IP address and DNS IP address from a DHCP server on the WAN. This method is
the default connection type.

To configure automatic IP address connection:

From the 'Connection Type' drop-down list, select 'Automatic IP Address Ethernet
Connection'.

Figure 8-3: Automatic IP Address WAN Ethernet Connection

8.1.1.3

PPPoE

The procedure below describes how to connect to the Internet by PPPoE

To configure PPPoE connection:
1. Under the WAN Ethernet group, from the 'Connection Type' drop-down list, select
'Point-to-Point Protocol over Ethernet (PPPoE)'.
2. Configure the PPPoE login username and password (provided by your ITSP).
Version 4.4.3

Figure 8-4: PPPoE WAN Ethernet Connection

67 MP-20x Multimedia Home Gateway
8. Setting up your Device