User's Manual
3.2.2.1.3 Point-to-Point Protocol over Ethernet (PPPoE)
To configure PPPoE connection:
1.
From the 'Connection Type' drop-down list, select 'Point-to-point protocol over
Ethernet (PPPoE)'.
2.
Your ISP should provide you with the following information:
•
Login user name
•
Login password
3.2.2.1.4 Point-to-Point Tunneling Protocol (PPTP)
To configure PPTP connection:
1.
From the 'Connection Type' drop-down list, select 'Point-to-Point Tunneling Protocol
(PPTP)'.
Figure 3-7: Internet Connection - Point-to-Point Tunneling Protocol
2.
Your ISP should provide you with the following information:
•
PPTP Server Host Name or IP Address
•
Login user name
•
Login password
Version 4.4.3
Figure 3-6: Internet Connection - PPPoE
27
3. Setting up a Network Connection
MP-20x Multimedia Home Gateway