Figure 15-12: Adding Port Triggering Rules - AudioCodes MP-20 Series User Manual


To add an entry for the gaming example above:
1. From the drop-down list, select 'User Defined' to add an entry; the screen 'Edit
Service' opens.
2. Enter a name for the service (e.g., 'game_server'), and then click the link New Trigger
Ports; the screen 'Edit Service Server Ports' opens.
3. In the 'Protocol' drop-down list, select 'UDP'; the screen refreshes, providing source
and destination port options.
4. Leave the 'Source Ports' drop-down list at its default 'Any'. In the 'Destination Ports'
drop-down list, select 'Single'; the screen refreshes again, providing an additional field
in which you should enter '222' as the destination port.
5. Click OK to save the settings.
6. In the screen 'Edit Service', click the link New Opened Ports; the screen 'Edit Service
Opened Ports' opens.
User's Manual

Figure 15-12: Adding Port Triggering Rules

Figure 15-13: Edit Service Server Ports
Figure 15-14: Edit Service Server Ports
248
MP-20x Multimedia Home Gateway
Document #: LTRT-50614