And Tr-104 Cpe Wan Management Protocol - AudioCodes MP-20 Series User Manual

Cpe & access gateway products, multimedia home gateway
Hide thumbs Also See for MP-20 Series:
Table of Contents

Advertisement

Secured HTTP (HTTPS) is supported. It is possible to enable HTTPS-only, if required.
The HTTP and/or HTTPS port can be modified (from the default 80 and 8080).
14.4.2 TR-069 and TR-104 CPE WAN Management Protocol
TR-069 is a WAN management protocol intended for communication between Customer
Premise Equipment (CPE) or residential devices (such as the device), and an Auto-
Configuration Server (ACS), residing on the service provider's side. It defines a mechanism
that encompasses secure auto configuration of CPE, and also incorporates other CPE
management functions into a common framework. In simpler terms, TR-069 is a protocol
that enables remote server management of the device. Such a protocol is useful, for
example, for remotely and securely controlling the device by the CPE provider. The
standard is published by the DSL Forum. TR-069 runs over SOAP/HTTP and enables
device configuration, management (including firmware upgrade), and status monitoring.
TR-104 is an extension of TR-069 for VoIP configuration and monitoring.
The TR standards are published by the DSL forum:
TR-069: http://www.broadband-forum.org/technical/download/TR-069.pdf
TR-104: http://www.broadband-forum.org/technical/download/TR-104.pdf
Figure 14-11: TR-069 CPE WAN Management Protocol
The TR-069 protocol allows an ACS to provision a CPE or collection of CPE based on a
variety of criteria. The provisioning mechanism includes specific provisioning parameters
and a general mechanism for adding vendor-specific provisioning capabilities as needed.
The provisioning mechanism allows CPE provisioning at the time of initial connection to the
broadband access network, and the ability to re-provision at any subsequent time. This
includes support for asynchronous ACS-initiated re-provisioning of CPE. TR-069 defines
several Remote Procedure Call (RPC) methods, as well as a large number of parameters,
which may be set or read. Some of these methods and parameters are defined as
mandatory.
Notes:
The device was tested for interoperability with two ACS vendors – Motive and
FriendlyTR69. Working with other ACS types may require specific interoperability
effort.
The parameter values in the subsequent tables are sample values only taken from
an ACS.
User's Manual
MP-20x Multimedia Home Gateway
214
Document #: LTRT-50614

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mp-20x

Table of Contents